You are currently viewing Nail Guns – How To Fix Shingle Roofs Like A Pro

Nail Guns – How To Fix Shingle Roofs Like A Pro

When most people think of a nail gun, they imagine someone precision-fitting trim or cabinets. But what if we told you that a nail gun could help you fix a shingle roof like a pro? It’s true!

When it comes to fixing shingle roofs, a nail gun is a perfect tool. Nail guns are powerful and precise, making them ideal for this work. Plus, they’re much faster than using a hammer and nails.

If you’re fixing a shingle roof, here are a few tips to help you get the job done like a pro:

Use the Correct Size and Type of Nails

When fixing a shingle roof, it’s essential to use the correct size and type of nails. The last bit you want is your nails to come loose or break.

For most shingle roofs, you’ll want to use three-inch nails. If you’re using a nail gun, make sure it’s set to the correct pressure. If you’re working with asphalt shingles, consider using ring-shank nails. These nails have serrated ridges that grip the shingle and keep it in place.

You’ll also want to use galvanized or stainless steel nails. These nails are less likely to rust, which is important when working with roofing materials.

Choose the Right Location

When fixing a shingle roof, it’s essential to use the correct size and type of nails. The last thing you’d want is for the nails to come loose or break.

Because the thickness, weight, and size of shingles can vary, professionals recommend the nails should be installed below the adhesive strip. You must also ensure the nail goes through the sheathing and into the rafters.

Use The Right Nail Gun

The roofing nailers are the type of nailers suitable for your roofing project. They’re made to drive nails into asphalt and fiberglass shingles without damaging them.

Among the favorites is the BOSTITCH roofing nailer with an upgraded engine and feed system that improves precision. Freeman Pneumatic mini palm nailer is another favorite that comes with a magnetic tip and is easy to use in tight spots.

Without a suitable nailer, you might as well be nailing your shingles by hand because it would be just about as effective – and take just as long.

Fixing Shingle Roofs:

The process of fixing shingle roofs is pretty straightforward. You start at the bottom, then nail your way up, nailing each row of shingles in place. Make sure to overlap each shingle row by about two inches, which will help ensure that your roof is watertight.

To ensure you’re doing professional-level work, use a chalk line to mark out the rows of shingles before you start nailing them in place. It will help ensure that each row is level and even.

When you reach the top of the roof, you’ll need to cut the shingles to fit. Use a utility knife to score them along the line where you need to cut, then snap them off. Make sure you wear workman gloves while you’re doing this, as the edges of the shingles can be sharp. Finally, nail the row of shingles at the top of the roof.

Bottom Line:

Roofing is a critical part of any home improvement or construction project. If done improperly, it can lead to severe and expensive problems.

If you’re not sure you can do it yourself, get in touch with RKG Roofing and Construction Recruiting, serving Lake Worth, FL, we can help you with all your residential and commercial roofing needs.

Contact us without delay!